Added proper installer

escpos/printer.py

@@ -0,0 +1,136 @@
+#!/usr/bin/python
+'''
+@author: Manuel F Martinez <manpaz@bashlinux.com>
+@organization: Bashlinux
+@copyright: Copyright (c) 2012 Bashlinux
+@license: GPL
+'''
+
+import usb.core
+import usb.util
+import serial
+import socket
+
+from escpos import *
+from constants import *
+from exceptions import *
+
+class Usb(Escpos):
+    """ Define USB printer """
+
+    def __init__(self, idVendor, idProduct, interface=0, in_ep=0x82, out_ep=0x01):
+        """
+        @param idVendor  : Vendor ID
+        @param idProduct : Product ID
+        @param interface : USB device interface
+        @param in_ep     : Input end point
+        @param out_ep    : Output end point
+        """
+        self.idVendor  = idVendor
+        self.idProduct = idProduct
+        self.interface = interface
+        self.in_ep     = in_ep
+        self.out_ep    = out_ep
+	self.open()
+
+
+    def open(self):
+        """ Search device on USB tree and set is as escpos device """
+        self.device = usb.core.find(idVendor=self.idVendor, idProduct=self.idProduct)
+        if self.device is None:
+            print "Cable isn't plugged in"
+
+        if self.device.is_kernel_driver_active(0):
+            try:
+                self.device.detach_kernel_driver(0)
+            except usb.core.USBError as e:
+                print "Could not detatch kernel driver: %s" % str(e)
+
+        try:
+            self.device.set_configuration()
+            self.device.reset()
+        except usb.core.USBError as e:
+            print "Could not set configuration: %s" % str(e)
+
+
+    def _raw(self, msg):
+        """ Print any command sent in raw format """
+        self.device.write(self.out_ep, msg, self.interface)
+
+
+    def __del__(self):
+        """ Release USB interface """
+        if self.device:
+            usb.util.dispose_resources(self.device)
+        self.device = None
+
+
+
+class Serial(Escpos):
+    """ Define Serial printer """
+
+    def __init__(self, devfile="/dev/ttyS0", baudrate=9600, bytesize=8, timeout=1):
+        """
+        @param devfile  : Device file under dev filesystem
+        @param baudrate : Baud rate for serial transmission
+        @param bytesize : Serial buffer size
+        @param timeout  : Read/Write timeout
+        """
+        self.devfile  = devfile
+        self.baudrate = baudrate
+        self.bytesize = bytesize
+        self.timeout  = timeout
+        self.open()
+
+
+    def open(self):
+        """ Setup serial port and set is as escpos device """
+        self.device = serial.Serial(port=self.devfile, baudrate=self.baudrate, bytesize=self.bytesize, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=self.timeout, dsrdtr=True)
+
+        if self.device is not None:
+            print "Serial printer enabled"
+        else:
+            print "Unable to open serial printer on: %s" % self.devfile
+
+
+    def _raw(self, msg):
+        """ Print any command sent in raw format """
+        self.device.write(msg)
+
+
+    def __del__(self):
+        """ Close Serial interface """
+        if self.device is not None:
+            self.device.close()
+
+
+
+class Network(Escpos):
+    """ Define Network printer """
+
+    def __init__(self,host,port=9100):
+        """
+        @param host : Printer's hostname or IP address
+        @param port : Port to write to
+        """
+        self.host = host
+        self.port = port
+        self.open()
+
+
+    def open(self):
+        """ Open TCP socket and set it as escpos device """
+        self.device = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+        self.device.connect((self.host, self.port))
+
+        if self.device is None:
+            print "Could not open socket for %s" % self.host
+
+
+    def _raw(self, msg):
+        self.device.send(msg)
+
+
+    def __del__(self):
+        """ Close TCP connection """
+        self.device.close()