Updated README and documentation

CHANGELOG

@@ -26,12 +26,18 @@ CHANGELOG
 * 2015-04-21 - Version 1.0.5
 - Merge pull request #45 from Krispy2009/master
   . Raising the right error when wrong charcode is used
-  . Sent by Krispy2009@gmail.com
+  . Sent by Kristi <Krispy2009@gmail.com>
 
 * 2015-07-06 - Version 1.0.6
 - Merge pull request #53 from ldos/master
   . Extended params for serial printers
-  . Sent by cafeteria.ldosalzira@gmail.com
+  . Sent by ldos <cafeteria.ldosalzira@gmail.com>
 
 * 2015-08-22 - Version 1.0.7
 - Issue #57: Fixed transparent images
+
+* 2015-10-27 - Version 1.0.8
+- Merge pull request #59 from zouppen/master
+  . Support for images vertically longer than 256 pixels
+  . Sent by Joel Lehtonen <joel.lehtonen@koodilehto.fi>
+- Updated README

README

@@ -4,16 +4,7 @@ ESCPOS
 Python library to manipulate ESC/POS Printers.
 
 ------------------------------------------------------------------
-1. Dependencies
-
-In order to start getting access to your printer, you must ensure
-you have previously installed the following python modules:
-
-  * pyusb (python-usb)
-  * PIL (Python Image Library)
-
-------------------------------------------------------------------
-2. Description
+1. Description
 
 Python ESC/POS is a library which lets the user have access to all
 those printers handled by ESC/POS commands, as defined by Epson,
@@ -33,60 +24,13 @@ paper, carrier return, printer reset and others concerned to the
 carriage alignment.
 
 ------------------------------------------------------------------
-3. Define your printer
-
-Before start create your Python ESC/POS printer instance, you must
-see at your system for the printer parameters. This is done with
-the 'lsusb' command.
-
-First run the command to look for the "Vendor ID" and "Product ID",
-then write down the values, these values are displayed just before
-the name of the device with the following format:
-
-  xxxx:xxxx
-
-Example:
-  Bus 002 Device 001: ID 1a2b:1a2b Device name
-
-Write down the the values in question, then issue the following
-command so you can get the "Interface" number and "End Point"
-
-  lsusb -vvv -d xxxx:xxxx | grep iInterface
-  lsusb -vvv -d xxxx:xxxx | grep bEndpointAddress | grep OUT
-
-The first command will yields the "Interface" number that must
-be handy to have and the second yields the "Output Endpoint"
-address.
-
-By default the "Interface" number is "0" and the "Output Endpoint"
-address is "0x82",  if you have other values then you can define
-with your instance.
-
-------------------------------------------------------------------
-4. Define your instance
-
-The following example shows how to initialize the Epson TM-TI88IV
-*** NOTE: Always finish the sequence with Epson.cut() otherwise
-          you will endup with weird chars being printed.
-
-  from escpos import *
-
-  """ Seiko Epson Corp. Receipt Printer M129 Definitions (EPSON TM-T88IV) """
-  Epson = escpos.Escpos(0x04b8,0x0202)
-  Epson.text("Hello World")
-  Epson.image("logo.gif")
-  Epson.barcode
-  Epson.barcode('1324354657687','EAN13',64,2,'','')
-  Epson.cut()
-
-------------------------------------------------------------------
-5. Links
+2. Documentation
 
 Please visit project documentation at:
 https://github.com/manpaz/python-escpos/wiki
 
 ------------------------------------------------------------------
-6. Donations
+3. Donations
 
 There are some different prints I'd like to acquire, but unfortunately
 not all, even used, are cheaper and easy to get.

setup.py

@@ -4,7 +4,7 @@ from distutils.core import setup
 
 setup(
     name='escpos',
-    version='1.0.7',
+    version='1.0.8',
     url='https://github.com/manpaz/python-escpos',
     download_url='https://github.com/manpaz/python-escpos.git',
     description='Python library to manipulate ESC/POS Printers',