From ac640785cca487bcfb0b8eff0eec00dee31a4c93 Mon Sep 17 00:00:00 2001 From: Stephan Sokolow Date: Thu, 22 May 2014 00:40:05 -0400 Subject: [PATCH] Make the structure of the ESC/POS commands less opaque (The commands are intended to be readable by people who grew up with ANSI escape codes so represent them that way in the code) --- escpos/constants.py | 142 ++++++++++++++++++++++++++++---------------- 1 file changed, 90 insertions(+), 52 deletions(-) diff --git a/escpos/constants.py b/escpos/constants.py index b5fca55..11dd3a4 100644 --- a/escpos/constants.py +++ b/escpos/constants.py @@ -1,54 +1,92 @@ """ ESC/POS Commands (Constants) """ -# Feed control sequences -CTL_LF = '\x0a' # Print and line feed -CTL_FF = '\x0c' # Form feed -CTL_CR = '\x0d' # Carriage return -CTL_HT = '\x09' # Horizontal tab -CTL_VT = '\x0b' # Vertical tab -# Printer hardware -HW_INIT = '\x1b\x40' # Clear data in buffer and reset modes -HW_SELECT = '\x1b\x3d\x01' # Printer select -HW_RESET = '\x1b\x3f\x0a\x00' # Reset printer hardware -# Cash Drawer -CD_KICK_2 = '\x1b\x70\x00' # Sends a pulse to pin 2 [] -CD_KICK_5 = '\x1b\x70\x01' # Sends a pulse to pin 5 [] -# Paper -PAPER_FULL_CUT = '\x1d\x56\x00' # Full cut paper -PAPER_PART_CUT = '\x1d\x56\x01' # Partial cut paper -# Text format -TXT_NORMAL = '\x1b\x21\x00' # Normal text -TXT_2HEIGHT = '\x1b\x21\x10' # Double height text -TXT_2WIDTH = '\x1b\x21\x20' # Double width text -TXT_4SQUARE = '\x1b\x21\x30' # Quad area text -TXT_UNDERL_OFF = '\x1b\x2d\x00' # Underline font OFF -TXT_UNDERL_ON = '\x1b\x2d\x01' # Underline font 1-dot ON -TXT_UNDERL2_ON = '\x1b\x2d\x02' # Underline font 2-dot ON -TXT_BOLD_OFF = '\x1b\x45\x00' # Bold font OFF -TXT_BOLD_ON = '\x1b\x45\x01' # Bold font ON -TXT_FONT_A = '\x1b\x4d\x00' # Font type A -TXT_FONT_B = '\x1b\x4d\x01' # Font type B -TXT_ALIGN_LT = '\x1b\x61\x00' # Left justification -TXT_ALIGN_CT = '\x1b\x61\x01' # Centering -TXT_ALIGN_RT = '\x1b\x61\x02' # Right justification -# Barcode format -BARCODE_TXT_OFF = '\x1d\x48\x00' # HRI barcode chars OFF -BARCODE_TXT_ABV = '\x1d\x48\x01' # HRI barcode chars above -BARCODE_TXT_BLW = '\x1d\x48\x02' # HRI barcode chars below -BARCODE_TXT_BTH = '\x1d\x48\x03' # HRI barcode chars both above and below -BARCODE_FONT_A = '\x1d\x66\x00' # Font type A for HRI barcode chars -BARCODE_FONT_B = '\x1d\x66\x01' # Font type B for HRI barcode chars -BARCODE_HEIGHT = '\x1d\x68\x64' # Barcode Height [1-255] -BARCODE_WIDTH = '\x1d\x77\x03' # Barcode Width [2-6] -BARCODE_UPC_A = '\x1d\x6b\x00' # Barcode type UPC-A -BARCODE_UPC_E = '\x1d\x6b\x01' # Barcode type UPC-E -BARCODE_EAN13 = '\x1d\x6b\x02' # Barcode type EAN13 -BARCODE_EAN8 = '\x1d\x6b\x03' # Barcode type EAN8 -BARCODE_CODE39 = '\x1d\x6b\x04' # Barcode type CODE39 -BARCODE_ITF = '\x1d\x6b\x05' # Barcode type ITF -BARCODE_NW7 = '\x1d\x6b\x06' # Barcode type NW7 -# Image format -S_RASTER_N = '\x1d\x76\x30\x00' # Set raster image normal size -S_RASTER_2W = '\x1d\x76\x30\x01' # Set raster image double width -S_RASTER_2H = '\x1d\x76\x30\x02' # Set raster image double height -S_RASTER_Q = '\x1d\x76\x30\x03' # Set raster image quadruple +#{ Control characters +# as labelled in http://www.novopos.ch/client/EPSON/TM-T20/TM-T20_eng_qr.pdf +NUL = '\x00' +EOT = '\x04' +ENQ = '\x05' +DLE = '\x10' +DC4 = '\x14' +CAN = '\x18' +ESC = '\x1b' +FS = '\x1c' +GS = '\x1d' + +#{ Feed control sequences +CTL_LF = '\n' # Print and line feed +CTL_FF = '\f' # Form feed +CTL_CR = '\r' # Carriage return +CTL_HT = '\t' # Horizontal tab +CTL_VT = '\v' # Vertical tab + +#{ Printer hardware +HW_INIT = ESC + '@' # Clear data in buffer and reset modes +HW_SELECT = ESC + '=\x01' # Printer select + +HW_RESET = ESC + '\x3f\x0a\x00' # Reset printer hardware + # (TODO: Where is this specified?) + +#{ Cash Drawer (ESC p ) +_CASH_DRAWER = lambda m, t1='', t2='': ESC + 'p' + m + t1 + t2 +CD_KICK_2 = _CASH_DRAWER('\x00') # Sends a pulse to pin 2 [] +CD_KICK_5 = _CASH_DRAWER('\x01') # Sends a pulse to pin 5 [] + +#{ Paper Cutter +_CUT_PAPER = lambda m: GS + 'V' + m +PAPER_FULL_CUT = _CUT_PAPER('\x00') # Full cut paper +PAPER_PART_CUT = _CUT_PAPER('\x01') # Partial cut paper + +#{ Text format +# TODO: Acquire the "ESC/POS Application Programming Guide for Paper Roll +# Printers" and tidy up this stuff too. +TXT_NORMAL = ESC + '!\x00' # Normal text +TXT_2HEIGHT = ESC + '!\x10' # Double height text +TXT_2WIDTH = ESC + '!\x20' # Double width text +TXT_4SQUARE = ESC + '!\x30' # Quad area text +TXT_UNDERL_OFF = ESC + '\x2d\x00' # Underline font OFF +TXT_UNDERL_ON = ESC + '\x2d\x01' # Underline font 1-dot ON +TXT_UNDERL2_ON = ESC + '\x2d\x02' # Underline font 2-dot ON +TXT_BOLD_OFF = ESC + '\x45\x00' # Bold font OFF +TXT_BOLD_ON = ESC + '\x45\x01' # Bold font ON +TXT_FONT_A = ESC + '\x4d\x00' # Font type A +TXT_FONT_B = ESC + '\x4d\x01' # Font type B +TXT_ALIGN_LT = ESC + '\x61\x00' # Left justification +TXT_ALIGN_CT = ESC + '\x61\x01' # Centering +TXT_ALIGN_RT = ESC + '\x61\x02' # Right justification + +#{ Barcode format +_SET_BARCODE_TXT_POS = lambda n: GS + 'H' + n +BARCODE_TXT_OFF = _SET_BARCODE_TXT_POS('\x00') # HRI barcode chars OFF +BARCODE_TXT_ABV = _SET_BARCODE_TXT_POS('\x01') # HRI barcode chars above +BARCODE_TXT_BLW = _SET_BARCODE_TXT_POS('\x02') # HRI barcode chars below +BARCODE_TXT_BTH = _SET_BARCODE_TXT_POS('\x03') # HRI both above and below + +_SET_HRI_FONT = lambda n: GS + 'f' + n +BARCODE_FONT_A = _SET_HRI_FONT('\x00') # Font type A for HRI barcode chars +BARCODE_FONT_B = _SET_HRI_FONT('\x01') # Font type B for HRI barcode chars + +BARCODE_HEIGHT = GS + 'h' + '\x64' # Barcode Height [1-255] +BARCODE_WIDTH = GS + 'w' + '\x03' # Barcode Width [2-6] + +#NOTE: This isn't actually an ESC/POS command. It's the common prefix to the +# two "print bar code" commands: +# - "GS k NUL" +# - "GS k " +# The latter command supports more barcode types +_SET_BARCODE_TYPE = lambda m: GS + 'k' + m +BARCODE_UPC_A = _SET_BARCODE_TYPE('\x00') # Barcode type UPC-A +BARCODE_UPC_E = _SET_BARCODE_TYPE('\x01') # Barcode type UPC-E +BARCODE_EAN13 = _SET_BARCODE_TYPE('\x02') # Barcode type EAN13 +BARCODE_EAN8 = _SET_BARCODE_TYPE('\x03') # Barcode type EAN8 +BARCODE_CODE39 = _SET_BARCODE_TYPE('\x04') # Barcode type CODE39 +BARCODE_ITF = _SET_BARCODE_TYPE('\x05') # Barcode type ITF +BARCODE_NW7 = _SET_BARCODE_TYPE('\x06') # Barcode type NW7 + +#{ Image format +# NOTE: _PRINT_RASTER_IMG is the obsolete ESC/POS "print raster bit image" +# command. The constants include a fragment of the data's header. +_PRINT_RASTER_IMG = lambda data: GS + 'v0' + data +S_RASTER_N = _PRINT_RASTER_IMG('\x00') # Set raster image normal size +S_RASTER_2W = _PRINT_RASTER_IMG('\x01') # Set raster image double width +S_RASTER_2H = _PRINT_RASTER_IMG('\x02') # Set raster image double height +S_RASTER_Q = _PRINT_RASTER_IMG('\x03') # Set raster image quadruple