276 lines
8.2 KiB
ReStructuredText
276 lines
8.2 KiB
ReStructuredText
*****
|
|
Usage
|
|
*****
|
|
|
|
Define your printer
|
|
-------------------
|
|
|
|
USB printer
|
|
^^^^^^^^^^^
|
|
|
|
Before creating your Python ESC/POS printer instance, consult the system to obtain
|
|
the printer parameters. This is done with the 'lsusb' command.
|
|
|
|
Run the command and look for the "Vendor ID" and "Product ID" and write
|
|
down the values. These values are displayed just before the name
|
|
of the device with the following format:
|
|
|
|
::
|
|
|
|
xxxx:xxxx
|
|
|
|
Example:
|
|
|
|
::
|
|
|
|
# lsusb
|
|
Bus 002 Device 001: ID 04b8:0202 Epson ...
|
|
|
|
Write down the the values in question, then issue the following command
|
|
so you can get the "Interface" number and "End Point"
|
|
|
|
::
|
|
|
|
# lsusb -vvv -d xxxx:xxxx | grep iInterface
|
|
iInterface 0
|
|
# lsusb -vvv -d xxxx:xxxx | grep bEndpointAddress | grep OUT
|
|
bEndpointAddress 0x01 EP 1 OUT
|
|
|
|
The first command will yield the "Interface" number that must be handy
|
|
to have and the second yields the "Output Endpoint" address.
|
|
|
|
**USB Printer initialization**
|
|
|
|
::
|
|
|
|
Epson = printer.Usb(0x04b8,0x0202)
|
|
|
|
By default the "Interface" number is "0" and the "Output Endpoint"
|
|
address is "0x01". If you have other values then you can define them on
|
|
your instance. So, assuming that we have another printer where in\_ep is
|
|
on 0x81 and out\_ep=0x02, then the printer definition should look like:
|
|
|
|
**Generic USB Printer initialization**
|
|
|
|
::
|
|
|
|
Generic = printer.Usb(0x1a2b,0x1a2b,0,0x81,0x02)
|
|
|
|
Network printer
|
|
^^^^^^^^^^^^^^^
|
|
|
|
You only need the IP of your printer, either because it is getting its
|
|
IP by DHCP or you set it manually.
|
|
|
|
**Network Printer initialization**
|
|
|
|
::
|
|
|
|
Epson = printer.Network("192.168.1.99")
|
|
|
|
Serial printer
|
|
^^^^^^^^^^^^^^
|
|
|
|
Most of the default values set by the DIP switches for the serial
|
|
printers, have been set as default on the serial printer class, so the
|
|
only thing you need to know is which serial port the printer is connected
|
|
to.
|
|
|
|
**Serial printer initialization**
|
|
|
|
::
|
|
|
|
Epson = printer.Serial("/dev/tty0")
|
|
|
|
Other printers
|
|
^^^^^^^^^^^^^^
|
|
|
|
Some printers under `/dev` can't be used or initialized with any of the
|
|
methods described above. Usually, those are printers used by printcap,
|
|
however, if you know the device name, you could try to initialize by
|
|
passing the device node name.
|
|
|
|
::
|
|
|
|
Epson = printer.File("/dev/usb/lp1")
|
|
|
|
The default is "/dev/usb/lp0", so if the printer is located on that
|
|
node, then you don't necessary need to pass the node name.
|
|
|
|
Define your instance
|
|
--------------------
|
|
|
|
The following example demonstrates how to initialize the Epson TM-TI88IV
|
|
on a USB interface.
|
|
|
|
::
|
|
|
|
from escpos import *
|
|
""" Seiko Epson Corp. Receipt Printer M129 Definitions (EPSON TM-T88IV) """
|
|
Epson = printer.Usb(0x04b8,0x0202)
|
|
# Print text
|
|
Epson.text("Hello World\n")
|
|
# Print image
|
|
Epson.image("logo.gif")
|
|
# Print QR Code
|
|
Epson.qr("You can readme from your smartphone")
|
|
# Print barcode
|
|
Epson.barcode('1324354657687','EAN13',64,2,'','')
|
|
# Cut paper
|
|
Epson.cut()
|
|
|
|
Configuration File
|
|
------------------
|
|
|
|
You can create a configuration file for python-escpos. This will
|
|
allow you to use the CLI, and skip some setup when using the library
|
|
programmatically.
|
|
|
|
The default configuration file is named ``config.yaml`` and uses the YAML
|
|
format. For windows it is probably at::
|
|
|
|
%appdata%/python-escpos/config.yaml
|
|
|
|
And for linux::
|
|
|
|
$HOME/.config/python-escpos/config.yaml
|
|
|
|
If you aren't sure, run::
|
|
|
|
from escpos import config
|
|
c = config.Config()
|
|
c.load()
|
|
|
|
If it can't find the configuration file in the default location, it will tell
|
|
you where it's looking. You can always pass a path, or a list of paths, to
|
|
the ``load()`` method.
|
|
|
|
To load the configured printer, run::
|
|
|
|
from escpos import config
|
|
c = config.Config()
|
|
printer = c.printer()
|
|
|
|
|
|
The printer section
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
The ``printer`` configuration section defines a default printer to create.
|
|
|
|
The only required paramter is ``type``. The value of this should be one of the
|
|
printers defined in :doc:`/user/printers`.
|
|
|
|
The rest of the parameters are whatever you want to pass to the printer.
|
|
|
|
An example file printer::
|
|
|
|
printer:
|
|
type: File
|
|
devfile: /dev/someprinter
|
|
|
|
And for a network printer::
|
|
|
|
printer:
|
|
type: network
|
|
host: 127.0.0.1
|
|
port: 9000
|
|
|
|
Printing text right
|
|
-------------------
|
|
Python-escpos is designed to accept unicode. So make sure that you use ``u'strings'`` or import ``unicode_literals``
|
|
from ``__future__`` if you are on Python 2. On Python 3 you should be fine.
|
|
|
|
For normal usage you can simply pass your text to the printers ``text()``-function. It will automatically guess
|
|
the right codepage and then send the encoded data to the printer. If this feature does not work, please try to
|
|
isolate the error and then create an issue on the Github project page.
|
|
|
|
If you want or need to you can manually set the codepage. For this please use the ``charcode()``-function. You can set
|
|
any key-value that is in ``CHARCODE``. If something is wrong, an ``CharCodeError`` will be raised.
|
|
After you have manually set the codepage the printer won't change it anymore. You can revert to normal behaviour
|
|
by setting charcode to ``AUTO``.
|
|
|
|
Advanced Usage: Print from binary blob
|
|
--------------------------------------
|
|
|
|
Imagine you have a file with ESC/POS-commands in binary form. This could be useful for testing capabilities of your
|
|
printer with a known working combination of commands.
|
|
You can print this data with the following code, using the standard methods of python-escpos. (This is an
|
|
advantage of the fact that `_raw()` accepts binary strings.)
|
|
|
|
::
|
|
|
|
from escpos import printer
|
|
p = printer.Serial() # adapt this to your printer model
|
|
|
|
file = open("binary-blob.bin", "rb") # read in the file containing your commands in binary-mode
|
|
data = file.read()
|
|
file.close()
|
|
|
|
p._raw(data)
|
|
|
|
That's all, the printer should then print your data. You can also use this technique to let others reproduce an issue
|
|
that you have found. (Just "print" your commands to a File-printer on your local filesystem.)
|
|
However, please keep in mind, that often it is easier and better to just supply the code that you are using.
|
|
|
|
Here you can download an example, that will print a set of common barcodes:
|
|
|
|
* :download:`barcode.bin </download/barcode.bin>` by `@mike42 <https://github.com/mike42>`_
|
|
|
|
Advanced Usage: change capabilities-profile
|
|
-------------------------------------------
|
|
|
|
Packaged together with the escpos-code is a capabilities-file. This file in
|
|
JSON-format describes the capabilities of different printers. It is developed and hosted in
|
|
`escpos-printer-db <https://github.com/receipt-print-hq/escpos-printer-db>`_.
|
|
|
|
Certain applications like the usage of `cx_freeze <https://cx-freeze.readthedocs.io>`_ might change the
|
|
packaging structure. This leads to the capabilities-profile not being found.
|
|
In this case you can use the environment-variable `ESCPOS_CAPABILITIES_FILE`.
|
|
The following code is an example.
|
|
|
|
.. code-block:: shell
|
|
|
|
# use packaged capabilities-profile
|
|
python-escpos cut
|
|
|
|
# use capabilities-profile that you have put in /usr/python-escpos
|
|
export ESCPOS_CAPABILITIES_FILE=/usr/python-escpos/capabilities.json
|
|
python-escpos cut
|
|
|
|
# use packaged file again
|
|
unset ESCPOS_CAPABILITIES_FILE
|
|
python-escpos cut
|
|
|
|
|
|
Hint: preprocess printing
|
|
-------------------------
|
|
|
|
Printing images directly to the printer is rather slow.
|
|
One factor that slows down the process is the transmission over e.g. serial port.
|
|
|
|
Apart from configuring your printer to use the maximum baudrate (in the case of serial-printers), there is not much
|
|
that you can do.
|
|
However you could use the :py:class:`escpos.printer.Dummy`-printer to preprocess your image.
|
|
This is probably best explained by an example:
|
|
|
|
.. code-block:: Python
|
|
|
|
from escpos.printer import Serial, Dummy
|
|
|
|
p = Serial()
|
|
d = Dummy()
|
|
|
|
# create ESC/POS for the print job, this should go really fast
|
|
d.text("This is my image:\n")
|
|
d.image("funny_cat.png")
|
|
d.cut()
|
|
|
|
# send code to printer
|
|
p._raw(d.output)
|
|
|
|
This way you could also store the code in a file and print it later.
|
|
You could then for example print the code from another process than your main-program and thus reduce the waiting time.
|
|
(Of course this will not make the printer print faster.)
|
|
|
|
|