54 lines
1.7 KiB
ReStructuredText
54 lines
1.7 KiB
ReStructuredText
********
|
|
Printers
|
|
********
|
|
|
|
.. note:: **TODO** Merge this page into the API-description.
|
|
|
|
There 3 different type of printers:
|
|
|
|
USB(idVendor, idProduct, interface, in\_ep, out\_ep)
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Based on pyusb and libusb-1.0
|
|
|
|
* ``idVendor`` is the Vendor ID
|
|
* ``idProduct`` is the Product ID
|
|
* ``interface`` is the USB device interface (default = 0)
|
|
* ``in_ep`` is the input end point (default = 0x82)
|
|
* ``out_ep`` is the output end point (default = 0x01)
|
|
|
|
Serial("devfile", baudrate, bytesize, timeout)
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Based on pyserial, default values are based on the defaults set by
|
|
DIP\_SWITCH\_1 on the documentation(hardware side).
|
|
|
|
* ``devfile`` is an alphanumeric device file name under /dev filesystem (default = /ev/ttyS0)
|
|
* ``baudrate`` is the Baud rate for serial transmission (default = 9600)
|
|
* ``bytesize`` sets the serial buffer size (default = 8)
|
|
* ``timeout`` defines Read/Write timeout (default = 1)
|
|
|
|
Network("host", port)
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Based on socket
|
|
* ``host`` is an alphanumeric host name, could be either DNS host name or IP address.
|
|
* ``port`` to write to (default = 9100)
|
|
|
|
Troubleshooting:
|
|
Problems with a network-attached printer can have numerous causes. Make sure that your device has a proper IP address.
|
|
Often you can check the IP address by triggering the self-test of the device. As a next step try to send text
|
|
manually to the device. You could use for example:
|
|
|
|
::
|
|
echo "OK\n" | nc IPADDRESS 9100
|
|
# the port number is often 9100
|
|
|
|
As a last resort try to reset the interface of the printer. This should be described in its manual.
|
|
|
|
File("file\_name")
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
Printcap printers
|
|
* ``file_name`` is the full path to the device file name
|