8a77c963c3
* changed structure of index-file * copied the WIKI at commit 67601b2d33f5a3cf8e9633e6ad92cca286840680 * adapted the markdown to rst
69 lines
1.4 KiB
ReStructuredText
69 lines
1.4 KiB
ReStructuredText
************
|
|
Raspberry Pi
|
|
************
|
|
|
|
This instructions were tested on Raspbian.
|
|
|
|
Unless you have done any distro with libusb-1.0 on the Raspberry Pi, the
|
|
following instructions should works fine on your raspberry distro.
|
|
|
|
Dependencies
|
|
------------
|
|
|
|
First, install the packages available on Raspbian.
|
|
|
|
::
|
|
|
|
# apt-get install python-imaging python-serial python-setuptools
|
|
|
|
PyUSB
|
|
^^^^^
|
|
|
|
PyUSB 1.0 is not available on Ubuntu, so you have to download and
|
|
install it manually
|
|
|
|
1. Download the latest tarball from
|
|
`Sourceforge <http://sourceforge.net/projects/pyusb/files/>`__
|
|
2. Decompress the zip file
|
|
3. Install the library
|
|
|
|
::
|
|
|
|
# wget ...
|
|
# unzip pyusb*.zip
|
|
# cd pyusb*
|
|
# python setup.py build
|
|
# sudo python setup.py install
|
|
|
|
python-qrcode
|
|
^^^^^^^^^^^^^
|
|
|
|
1. Checkout the code from github
|
|
2. Install the library
|
|
|
|
::
|
|
|
|
# git clone https://github.com/lincolnloop/python-qrcode
|
|
# cd python-qrcode
|
|
# python setup.py build
|
|
# sudo python setup.py install
|
|
|
|
Installation
|
|
------------
|
|
|
|
If you have installed pyusb for libusb-1.0 then you need to:
|
|
|
|
1. Download the latest file
|
|
1. Decompress the file
|
|
1. Install the library
|
|
|
|
::
|
|
|
|
# git clone https://github.com/manpaz/python-escpos.git
|
|
# cd python-escpos
|
|
# python setup.py build
|
|
# sudo python setup.py install
|
|
|
|
Now you can attach your printer and and test it with the example code in
|
|
the project's `home <https://github.com/manpaz/python-escpos>`__
|