setop
/
python-escpos
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
python-escpos/escpos/constants.py

214 lines
8.9 KiB
Python
Raw Blame History

""" Set of ESC/POS Commands (Constants)
This module contains constants that are described in the esc/pos-documentation.
Since there is no definitive and unified specification for all esc/pos-like printers the constants could later be
moved to `capabilities` as in `escpos-php by @mike42 <https://github.com/mike42/escpos-php>`_.
:author: `Manuel F Martinez <manpaz@bashlinux.com>`_ and others
:organization: Bashlinux and `python-escpos <https://github.com/python-escpos>`_
:copyright: Copyright (c) 2012 Bashlinux
:license: GNU GPL v3
"""
# Control characters
# as labelled in http://www.novopos.ch/client/EPSON/TM-T20/TM-T20_eng_qr.pdf
NUL = '\x00'
EOT = '\x04'
ENQ = '\x05'
DLE = '\x10'
DC4 = '\x14'
CAN = '\x18'
ESC = '\x1b'
FS = '\x1c'
GS = '\x1d'
# Feed control sequences
CTL_LF = '\n' # Print and line feed
CTL_FF = '\f' # Form feed
CTL_CR = '\r' # Carriage return
CTL_HT = '\t' # Horizontal tab
CTL_SET_HT = ESC + '\x44' # Set horizontal tab positions
CTL_VT = '\v' # Vertical tab
# Printer hardware
HW_INIT = ESC + '@' # Clear data in buffer and reset modes
HW_SELECT = ESC + '=\x01' # Printer select
HW_RESET = ESC + '\x3f\x0a\x00' # Reset printer hardware
# (TODO: Where is this specified?)
#{ Cash Drawer (ESC p <pin> <on time: 2*ms> <off time: 2*ms>)
_CASH_DRAWER = lambda m, t1='', t2='': ESC + 'p' + m + chr(t1) + chr(t2)
CD_KICK_2 = _CASH_DRAWER('\x00', 50, 50) # Sends a pulse to pin 2 []
CD_KICK_5 = _CASH_DRAWER('\x01', 50, 50) # Sends a pulse to pin 5 []
# Paper Cutter
_CUT_PAPER = lambda m: GS + 'V' + m
PAPER_FULL_CUT = _CUT_PAPER('\x00') # Full cut paper
PAPER_PART_CUT = _CUT_PAPER('\x01') # Partial cut paper
# Text format
# TODO: Acquire the "ESC/POS Application Programming Guide for Paper Roll
# Printers" and tidy up this stuff too.
TXT_FLIP_ON = ESC + '\x7b\x01'
TXT_FLIP_OFF = ESC + '\x7b\x00'
TXT_SMOOTH_ON = GS + '\x62\x01'
TXT_SMOOTH_OFF = GS + '\x62\x00'
TXT_SIZE = GS + '!'
TXT_WIDTH = {1: 0x00,
2: 0x10,
3: 0x20,
4: 0x30,
5: 0x40,
6: 0x50,
7: 0x60,
8: 0x70}
TXT_HEIGHT = {1: 0x00,
2: 0x01,
3: 0x02,
4: 0x03,
5: 0x04,
6: 0x05,
7: 0x06,
8: 0x07}
TXT_NORMAL = ESC + '!\x00' # Normal text
TXT_2HEIGHT = ESC + '!\x10' # Double height text
TXT_2WIDTH = ESC + '!\x20' # Double width text
TXT_4SQUARE = ESC + '!\x30' # Quad area text
TXT_UNDERL_OFF = ESC + '\x2d\x00' # Underline font OFF
TXT_UNDERL_ON = ESC + '\x2d\x01' # Underline font 1-dot ON
TXT_UNDERL2_ON = ESC + '\x2d\x02' # Underline font 2-dot ON
TXT_BOLD_OFF = ESC + '\x45\x00' # Bold font OFF
TXT_BOLD_ON = ESC + '\x45\x01' # Bold font ON
TXT_FONT_A = ESC + '\x4d\x00' # Font type A
TXT_FONT_B = ESC + '\x4d\x01' # Font type B
TXT_ALIGN_LT = ESC + '\x61\x00' # Left justification
TXT_ALIGN_CT = ESC + '\x61\x01' # Centering
TXT_ALIGN_RT = ESC + '\x61\x02' # Right justification
TXT_INVERT_ON = GS + '\x42\x01' # Inverse Printing ON
TXT_INVERT_OFF = GS + '\x42\x00' # Inverse Printing OFF
# Char code table
CHARCODE_PC437 = ESC + '\x74\x00' # USA: Standard Europe
CHARCODE_JIS = ESC + '\x74\x01' # Japanese Katakana
CHARCODE_PC850 = ESC + '\x74\x02' # Multilingual
CHARCODE_PC860 = ESC + '\x74\x03' # Portuguese
CHARCODE_PC863 = ESC + '\x74\x04' # Canadian-French
CHARCODE_PC865 = ESC + '\x74\x05' # Nordic
CHARCODE_WEU = ESC + '\x74\x06' # Simplified Kanji, Hirakana
CHARCODE_GREEK = ESC + '\x74\x07' # Simplified Kanji
CHARCODE_HEBREW = ESC + '\x74\x08' # Simplified Kanji
CHARCODE_PC1252 = ESC + '\x74\x11' # Western European Windows Code Set
CHARCODE_PC866 = ESC + '\x74\x12' # Cirillic #2
CHARCODE_PC852 = ESC + '\x74\x13' # Latin 2
CHARCODE_PC858 = ESC + '\x74\x14' # Euro
CHARCODE_THAI42 = ESC + '\x74\x15' # Thai character code 42
CHARCODE_THAI11 = ESC + '\x74\x16' # Thai character code 11
CHARCODE_THAI13 = ESC + '\x74\x17' # Thai character code 13
CHARCODE_THAI14 = ESC + '\x74\x18' # Thai character code 14
CHARCODE_THAI16 = ESC + '\x74\x19' # Thai character code 16
CHARCODE_THAI17 = ESC + '\x74\x1a' # Thai character code 17
CHARCODE_THAI18 = ESC + '\x74\x1b' # Thai character code 18
# Barcode format
_SET_BARCODE_TXT_POS = lambda n: GS + 'H' + n
BARCODE_TXT_OFF = _SET_BARCODE_TXT_POS('\x00') # HRI barcode chars OFF
BARCODE_TXT_ABV = _SET_BARCODE_TXT_POS('\x01') # HRI barcode chars above
BARCODE_TXT_BLW = _SET_BARCODE_TXT_POS('\x02') # HRI barcode chars below
BARCODE_TXT_BTH = _SET_BARCODE_TXT_POS('\x03') # HRI both above and below
_SET_HRI_FONT = lambda n: GS + 'f' + n
BARCODE_FONT_A = _SET_HRI_FONT('\x00') # Font type A for HRI barcode chars
BARCODE_FONT_B = _SET_HRI_FONT('\x01') # Font type B for HRI barcode chars
BARCODE_HEIGHT = GS + 'h' # Barcode Height [1-255]
BARCODE_WIDTH = GS + 'w' # Barcode Width [2-6]
#NOTE: This isn't actually an ESC/POS command. It's the common prefix to the
# two "print bar code" commands:
# - Type A: "GS k <type as integer> <data> NUL"
# - TYPE B: "GS k <type as letter> <data length> <data>"
# The latter command supports more barcode types
_SET_BARCODE_TYPE = lambda m: GS + 'k' + m
# Barcodes for type A
BARCODE_A_UPC_A = _SET_BARCODE_TYPE('\x00') # Barcode type UPC-A
BARCODE_A_UPC_E = _SET_BARCODE_TYPE('\x01') # Barcode type UPC-E
BARCODE_A_EAN13 = _SET_BARCODE_TYPE('\x02') # Barcode type EAN13
BARCODE_A_EAN8 = _SET_BARCODE_TYPE('\x03') # Barcode type EAN8
BARCODE_A_CODE39 = _SET_BARCODE_TYPE('\x04') # Barcode type CODE39
BARCODE_A_ITF = _SET_BARCODE_TYPE('\x05') # Barcode type ITF
BARCODE_A_NW7 = _SET_BARCODE_TYPE('\x06') # Barcode type NW7
# Barcodes for type B
BARCODE_B_UPC_A = _SET_BARCODE_TYPE('\x65') # Barcode type UPC-A
BARCODE_B_UPC_E = _SET_BARCODE_TYPE('\x66') # Barcode type UPC-E
BARCODE_B_EAN13 = _SET_BARCODE_TYPE('\x67') # Barcode type EAN13
BARCODE_B_EAN8 = _SET_BARCODE_TYPE('\x68') # Barcode type EAN8
BARCODE_B_CODE39 = _SET_BARCODE_TYPE('\x69') # Barcode type CODE39
BARCODE_B_ITF = _SET_BARCODE_TYPE('\x70') # Barcode type ITF
BARCODE_B_NW7 = _SET_BARCODE_TYPE('\x71') # Barcode type NW7
BARCODE_B_CODE93 = _SET_BARCODE_TYPE('\x72') # Barcode type CODE93
BARCODE_B_CODE128 = _SET_BARCODE_TYPE('\x73') # Barcode type CODE128
BARCODE_B_GS1_128 = _SET_BARCODE_TYPE('\x74') # Barcode type GS1_128
BARCODE_B_GS1_DATABAR_OMNI = _SET_BARCODE_TYPE('\x75') # Barcode type GS1 DataBar Omnidirectional
BARCODE_B_GS1_DATABAR_TRUNC = _SET_BARCODE_TYPE('\x76') # Barcode type GS1 DataBar Truncated
BARCODE_B_GS1_DATABAR_LIM = _SET_BARCODE_TYPE('\x77') # Barcode type GS1 DataBar Limited
BARCODE_B_GS1_DATABAR_EXP = _SET_BARCODE_TYPE('\x78') # Barcode type GS1 DataBar Expanded
# Constants to be used when the user is calling the function. All uppercase.
BARCODE_TYPE_A = {
'UPC-A': BARCODE_A_UPC_A,
'UPC-E': BARCODE_A_UPC_E,
'EAN13': BARCODE_A_EAN13,
'EAN8': BARCODE_A_EAN8,
'CODE39': BARCODE_A_CODE39,
'ITF': BARCODE_A_ITF,
'NW7': BARCODE_A_NW7,
'CODABAR': BARCODE_A_NW7,
}
BARCODE_TYPE_B = {
'UPC-A': BARCODE_B_UPC_A,
'UPC-E': BARCODE_B_UPC_E,
'EAN13': BARCODE_B_EAN13,
'EAN8': BARCODE_B_EAN8,
'CODE39': BARCODE_B_CODE39,
'ITF': BARCODE_B_ITF,
'NW7': BARCODE_B_NW7,
'CODABAR': BARCODE_B_NW7,
'CODE93': BARCODE_B_CODE93,
'CODE128': BARCODE_B_CODE128,
'GS1_128': BARCODE_B_GS1_128,
'GS1 DATABAR OMNIDIRECTIONAL': BARCODE_B_GS1_DATABAR_OMNI,
'GS1 DATABAR TRUNCATED': BARCODE_B_GS1_DATABAR_TRUNC,
'GS1 DATABAR LIMITED': BARCODE_B_GS1_DATABAR_LIM,
'GS1 DATABAR EXPANDED': BARCODE_B_GS1_DATABAR_EXP,
}
BARCODE_TYPES = {
'A': BARCODE_TYPE_A,
'B': BARCODE_TYPE_B,
}
# Image format
# NOTE: _PRINT_RASTER_IMG is the obsolete ESC/POS "print raster bit image"
# command. The constants include a fragment of the data's header.
_PRINT_RASTER_IMG = lambda data: GS + 'v0' + data
S_RASTER_N = _PRINT_RASTER_IMG('\x00') # Set raster image normal size
S_RASTER_2W = _PRINT_RASTER_IMG('\x01') # Set raster image double width
S_RASTER_2H = _PRINT_RASTER_IMG('\x02') # Set raster image double height
S_RASTER_Q = _PRINT_RASTER_IMG('\x03') # Set raster image quadruple
# Printing Density
PD_N50 = GS + '\x7c\x00' # Printing Density -50%
PD_N37 = GS + '\x7c\x01' # Printing Density -37.5%
PD_N25 = GS + '\x7c\x02' # Printing Density -25%
PD_N12 = GS + '\x7c\x03' # Printing Density -12.5%
PD_0 = GS + '\x7c\x04' # Printing Density 0%
PD_P50 = GS + '\x7c\x08' # Printing Density +50%
PD_P37 = GS + '\x7c\x07' # Printing Density +37.5%
PD_P25 = GS + '\x7c\x06' # Printing Density +25%
PD_P12 = GS + '\x7c\x05' # Printing Density +12.5%
Reference in New Issue View Git Blame Copy Permalink