Merge pull request #169 from python-escpos/development

v2.2.0

.travis.yml

@@ -34,3 +34,7 @@ before_install:
 script:
     - tox
     - codecov
+notifications:
+  email:
+    on_success: never
+    on_failure: change

CHANGELOG.rst

@@ -1,6 +1,34 @@
 *********
 Changelog
 *********
+2016-08-26 - Version 2.2.0 - "Fate Amenable To Change"
+------------------------------------------------------
+
+changes
+^^^^^^^
+- fix improper API-use in qrcode()
+- change setup.py shebang to make it compatible with virtualenvs.
+- add constants for sheet mode and colors
+- support changing the linespacing
+
+contributors
+^^^^^^^^^^^^
+- Michael Elsdörfer
+- Patrick Kanzler
+
+2016-08-10 - Version 2.1.3 - "Ethics Gradient"
+----------------------------------------------
+
+changes
+^^^^^^^
+- configure readthedocs and travis
+- update doc with hint on image preprocessing
+- add fix for printing large images (by splitting them into multiple images)
+
+contributors
+^^^^^^^^^^^^
+- Patrick Kanzler
+
 2016-08-02 - Version 2.1.2 - "Death and Gravity"
 ------------------------------------------------
 

README.rst

@@ -54,14 +54,14 @@ The basic usage is:
 
 .. code:: python
 
-    from escpos import *
+    from escpos.printer import Usb
 
     """ Seiko Epson Corp. Receipt Printer M129 Definitions (EPSON TM-T88IV) """
-    Epson = escpos.Escpos(0x04b8,0x0202,0)
-    Epson.text("Hello World\n")
-    Epson.image("logo.gif")
-    Epson.barcode('1324354657687','EAN13',64,2,'','')
-    Epson.cut()
+    p = Usb(0x04b8,0x0202,0)
+    p.text("Hello World\n")
+    p.image("logo.gif")
+    p.barcode('1324354657687','EAN13',64,2,'','')
+    p.cut()
 
 The full project-documentation is available on `Read the Docs <https://python-escpos.readthedocs.io>`_.
 

doc/user/usage.rst

@@ -204,6 +204,37 @@ Here you can download an example, that will print a set of common barcodes:
 
     * :download:`barcode.bin </download/barcode.bin>` by `@mike42 <https://github.com/mike42>`_
 
+Hint: preprocess printing
+-------------------------
+
+Printing images directly to the printer is rather slow.
+One factor that slows down the process is the transmission over e.g. serial port.
+
+Apart from configuring your printer to use the maximum baudrate (in the case of serial-printers), there is not much
+that you can do.
+However you could use the :py:class:`escpos.printer.Dummy`-printer to preprocess your image.
+This is probably best explained by an example:
+
+.. code-block:: Python
+
+   from escpos.printer import Serial, Dummy
+
+   p = Serial()
+   d = Dummy()
+
+   # create ESC/POS for the print job, this should go really fast
+   d.text("This is my image:\n")
+   d.image("funny_cat.png")
+   d.cut()
+
+   # send code to printer
+   p._raw(d.output)
+
+This way you could also store the code in a file and print later.
+You could then for example print the code from another process than your main-program and thus reduce the waiting time.
+(Of course this will not make the printer print faster.)
+
+
 How to update your code for USB printers
 ----------------------------------------
 

readthedocs.yml

@@ -0,0 +1,7 @@
+formats:
+  - pdf
+  - epub
+requirements_file: doc/requirements.txt
+python:
+  version: 2
+  setup_py_install: true

setup.py

@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 
 import os
 import sys

src/escpos/constants.py

@@ -55,11 +55,18 @@ _CUT_PAPER = lambda m: GS + b'V' + m
 PAPER_FULL_CUT = _CUT_PAPER(b'\x00')  # Full cut paper
 PAPER_PART_CUT = _CUT_PAPER(b'\x01')  # Partial cut paper
 
+# Beep
+BEEP = b'\x07'
+
 # Panel buttons (e.g. the FEED button)
 _PANEL_BUTTON = lambda n: ESC + b'c5' + six.int2byte(n)
 PANEL_BUTTON_ON = _PANEL_BUTTON(0)  # enable all panel buttons
 PANEL_BUTTON_OFF = _PANEL_BUTTON(1)  # disable all panel buttons
 
+# Sheet modes
+SHEET_SLIP_MODE = ESC + b'\x63\x30\x04'  # slip paper
+SHEET_ROLL_MODE = ESC + b'\x63\x30\x01'  # paper roll
+
 # Text format
 # TODO: Acquire the "ESC/POS Application Programming Guide for Paper Roll
 #       Printers" and tidy up this stuff too.
@@ -101,6 +108,18 @@ TXT_ALIGN_RT   = ESC + b'\x61\x02'  # Right justification
 TXT_INVERT_ON  = GS  + b'\x42\x01'  # Inverse Printing ON
 TXT_INVERT_OFF = GS  + b'\x42\x00'  # Inverse Printing OFF
 
+# Text colors
+TXT_COLOR_BLACK = ESC + b'\x72\x00'  # Default Color
+TXT_COLOR_RED = ESC + b'\x72\x01'    # Alternative Color (Usually Red)
+
+# Spacing
+LINESPACING_RESET = ESC + b'2'
+LINESPACING_FUNCS = {
+  60: ESC + b'A',  # line_spacing/60 of an inch, 0 <= line_spacing <= 85
+  360: ESC + b'+', # line_spacing/360 of an inch, 0 <= line_spacing <= 255
+  180: ESC + b'3', # line_spacing/180 of an inch, 0 <= line_spacing <= 255
+}
+
 # Char code table
 CHARCODE_PC437  = ESC + b'\x74\x00'  # USA: Standard Europe
 CHARCODE_JIS    = ESC + b'\x74\x01'  # Japanese Katakana
@@ -186,7 +205,7 @@ QR_ECLEVEL_L = 0
 QR_ECLEVEL_M = 1
 QR_ECLEVEL_Q = 2
 QR_ECLEVEL_H = 3
-    
+
 # QRcode models
 QR_MODEL_1 = 1
 QR_MODEL_2 = 2

src/escpos/escpos.py

@@ -56,7 +56,8 @@ class Escpos(object):
         """
         pass
 
-    def image(self, img_source, high_density_vertical=True, high_density_horizontal=True, impl="bitImageRaster"):
+    def image(self, img_source, high_density_vertical=True, high_density_horizontal=True, impl="bitImageRaster",
+              fragment_height=1024):
         """ Print an image
 
         You can select whether the printer should print in high density or not. The default value is high density.
@@ -76,9 +77,20 @@ class Escpos(object):
         :param high_density_vertical: print in high density in vertical direction *default:* True
         :param high_density_horizontal: print in high density in horizontal direction *default:* True
         :param impl: choose image printing mode between `bitImageRaster`, `graphics` or `bitImageColumn`
+        :param fragment_height: Images larger than this will be split into multiple fragments *default:* 1024
 
         """       
         im = EscposImage(img_source)
+
+        if im.height > fragment_height:
+            fragments = im.split(fragment_height)
+            for fragment in fragments:
+                self.image(fragment,
+                           high_density_vertical=high_density_vertical,
+                           high_density_horizontal=high_density_horizontal,
+                           impl=impl,
+                           fragment_height=fragment_height)
+            return
         
         if impl == "bitImageRaster":
             # GS v 0, raster format bit image
@@ -553,6 +565,35 @@ class Escpos(object):
         else:
             self._raw(TXT_INVERT_OFF)
 
+    def line_spacing(self, spacing=None, divisor=180):
+        """ Set line character spacing.
+
+        If no spacing is given, we reset it to the default.
+
+        There are different commands for setting the line spacing, using
+        a different denominator:
+
+        '+'' line_spacing/360 of an inch, 0 <= line_spacing <= 255
+        '3' line_spacing/180 of an inch, 0 <= line_spacing <= 255
+        'A' line_spacing/60 of an inch, 0 <= line_spacing <= 85
+
+        Some printers may not support all of them. The most commonly
+        available command (using a divisor of 180) is chosen.
+        """
+        if spacing is None:
+            self._raw(LINESPACING_RESET)
+            return
+
+        if divisor not in LINESPACING_FUNCS:
+            raise ValueError("divisor must be either 360, 180 or 60")
+        if (divisor in [360, 180] \
+                and (not(0 <= spacing <= 255))):
+            raise ValueError("spacing must be a int between 0 and 255 when divisor is 360 or 180")
+        if divisor == 60 and (not(0 <= spacing <= 85)):
+            raise ValueError("spacing must be a int between 0 and 85 when divisor is 60")
+
+        self._raw(LINESPACING_FUNCS[divisor] + six.int2byte(spacing))
+
     def cut(self, mode=''):
         """ Cut paper.
 

src/escpos/image.py

@@ -8,6 +8,12 @@ This module contains the image format handler :py:class:`EscposImage`.
 :license: GNU GPL v3
 """
 
+from __future__ import absolute_import
+from __future__ import division
+from __future__ import print_function
+from __future__ import unicode_literals
+
+import math
 from PIL import Image, ImageOps
 
 
@@ -30,6 +36,9 @@ class EscposImage(object):
         else:
             img_original = Image.open(img_source)
 
+        # store image for eventual further processing (splitting)
+        self.img_original = img_original
+
         # Convert to white RGB background, paste over white background
         # to strip alpha.
         img_original = img_original.convert('RGBA')
@@ -88,3 +97,21 @@ class EscposImage(object):
         Convert image to raster-format binary
         """
         return self._im.tobytes()
+
+    def split(self, fragment_height):
+        """
+        Split an image into multiple fragments after fragment_height pixels
+
+        :param fragment_height: height of fragment
+        :return: list of PIL objects
+        """
+        passes = int(math.ceil(self.height/fragment_height))
+        fragments = []
+        for n in range(0, passes):
+            left = 0
+            right = self.width
+            upper = n * fragment_height
+            lower = min((n + 1) * fragment_height, self.height)
+            box = (left, upper, right, lower)
+            fragments.append(self.img_original.crop(box))
+        return fragments

test/test_function_image.py

@@ -130,3 +130,12 @@ def test_graphics_transparent():
     instance = printer.Dummy()
     instance.image('test/resources/black_transparent.png', impl="graphics")
     assert(instance.output == b'\x1d(L\x0c\x000p0\x01\x011\x02\x00\x02\x00\xc0\x00\x1d(L\x02\x0002')
+
+
+def test_large_graphics():
+    """
+    Test whether 'large' graphics that induce a fragmentation are handled correctly.
+    """
+    instance = printer.Dummy()
+    instance.image('test/resources/black_white.png', impl="bitImageRaster", fragment_height=1)
+    assert(instance.output == b'\x1dv0\x00\x01\x00\x01\x00\xc0\x1dv0\x00\x01\x00\x01\x00\x00')

test/test_function_qr_non-native.py

@@ -0,0 +1,32 @@
+#!/usr/bin/python
+#  -*- coding: utf-8 -*-
+"""tests for the non-native part of qr()
+
+:author: `Patrick Kanzler <patrick.kanzler@fablab.fau.de>`_
+:organization: `python-escpos <https://github.com/python-escpos>`_
+:copyright: Copyright (c) 2016 `python-escpos <https://github.com/python-escpos>`_
+:license: GNU GPL v3
+"""
+
+from __future__ import absolute_import
+from __future__ import division
+from __future__ import print_function
+from __future__ import unicode_literals
+
+import mock
+
+from escpos.printer import Dummy
+from PIL import Image
+
+
+@mock.patch('escpos.printer.Dummy.image', spec=Dummy)
+def test_type_of_object_passed_to_image_function(img_function):
+    """
+    Test the type of object that is passed to the image function during non-native qr-printing.
+
+    The type should be PIL.Image
+    """
+    d = Dummy()
+    d.qr("LoremIpsum")
+    args, kwargs = img_function.call_args
+    assert isinstance(args[0], Image.Image)

test/test_functions.py

@@ -0,0 +1,26 @@
+from nose.tools import assert_raises
+from escpos.printer import Dummy
+
+
+def test_line_spacing_code_gen():
+    printer = Dummy()
+    printer.line_spacing(10)
+    assert printer.output == b'\x1b3\n'
+
+
+def test_line_spacing_rest():
+    printer = Dummy()
+    printer.line_spacing()
+    assert printer.output == b'\x1b2'
+
+
+def test_line_spacing_error_handling():
+    printer = Dummy()
+    with assert_raises(ValueError):
+      printer.line_spacing(99, divisor=44)
+    with assert_raises(ValueError):
+      printer.line_spacing(divisor=80, spacing=86)
+    with assert_raises(ValueError):
+      printer.line_spacing(divisor=360, spacing=256)
+    with assert_raises(ValueError):
+      printer.line_spacing(divisor=180, spacing=256)

test/test_image.py

@@ -43,6 +43,20 @@ def test_image_white():
         _load_and_check_img('canvas_white.' + img_format, 1, 1, b'\x00', [b'\x00'])
 
 
+def test_split():
+    """
+    test whether the split-function works as expected
+    """
+    im = EscposImage('test/resources/black_white.png')
+    (upper_part, lower_part) = im.split(1)
+    upper_part = EscposImage(upper_part)
+    lower_part = EscposImage(lower_part)
+    assert(upper_part.width == lower_part.width == 2)
+    assert(upper_part.height == lower_part.height == 1)
+    assert(upper_part.to_raster_format() == b'\xc0')
+    assert(lower_part.to_raster_format() == b'\x00')
+
+
 def _load_and_check_img(filename, width_expected, height_expected, raster_format_expected, column_format_expected):
     """
     Load an image, and test whether raster & column formatted output, sizes, etc match expectations.